About seller
An excellent correlation of differential pulse voltammetry intensities with CTC numbers is obtained from 2 to 5000 cell mL-1. This nanoplatform not only paves a way to combine starvation therapy agents with Fenton-like reaction for chemodynamic therapy but also opens up new insights into the construction of all-in-one chips for CTC capture and diagnosis.In conductive polymer composites (CPCs), which can be used as both strain sensors and materials with self-diagnosis capabilities for structural health monitoring, the piezoresistive sensitivity can be tuned by changing the electrical filler network structure, mainly influenced by the conductive filler content. Typically, the electrical resistance increases exponentially with strain, and the piezoresistive sensitivity and linearity cannot be improved simultaneously. In this work, we report a facile method to tune the piezoresistive behavior of melt-mixed poly(vinylidene fluoride) (PVDF)/carbon nanotube (CNT, 0.75-2.0 wt %) composites using blending with poly(methyl methacrylate) (PMMA, 5-30 wt %). PVDF and PMMA are completely miscible in the melt state regardless of the proportion. For PVDF-rich blends, the crystallization of PVDF induces separation of the PVDF crystal region from the miscible PVDF/PMMA amorphous blend part during the cooling process. Addition of PMMA tuned the piezoresistive strain behavior and improved the electrical conductivity and toughness at the same time. The PVDF/PMMA/CNT composites show higher sensitivity at low strains than their PVDF/CNT counterparts with comparable initial resistivity. For example, ΔR/R0 at 5% strain is 18.6% for the PVDF(80)/PMMA(20) blend containing 0.75 wt % CNT versus 11.0% for PVDF containing 1 wt % CNT, both having a volume resistivity of around 104 Ω·cm. The PVDF/PMMA/CNT blend composites also show a less steep exponential increase in the sensing response at higher strains, indicating better linearity. These differences are due to the altered microstructure of the composites and the more homogeneous distribution of CNTs between the smaller and less numerous PVDF crystallites when PMMA is added. The concept of modifying the composite microstructure by adding another commercially available miscible polymer offers a simple and effective way to tune the piezoresistive behavior and improve mechanical properties of CPC sensor materials.Exploring the structure-activity relationship (SAR) at the cationic part of arylthiazole antibiotics revealed hydrazine as an active moiety. The main objective of the study is to overcome the inherited toxicity associated with the free hydrazine. A series of hydrocarbon bridges was inserted in between the groups, to separate the two amino groups. Mubritinib Hence, the aminomethylpiperidine-containing analog 16 was identified as a new promising antibacterial agent with efficient antibacterial and pharmacokinetic profiles. Briefly, compound 16 outperformed vancomycin in terms of the antibacterial spectrum against vancomycin-resistant staphylococcal and enterococcal strains with minimum inhibitory concentrations (MICs) ranging from 2 to 4 μg/mL, which is a faster bactericidal mode of action, completely eradicating the high staphylococcal burden within 6-8 h, and it has a unique ability to completely clear intracellular staphylococci. In addition, the initial pharmacokinetic assessment confirmed the high metabolic stability of compound 16 (biological half-life >4 h); it had a good extravascular distribution and maintained a plasma concentration higher than the average MIC value for over 12 h. Moreover, compound 16 significantly reduced MRSA burden in an in vivo MRSA skin infection mouse experiment. These attributes collectively suggest that compound 16 is a good therapeutic candidate for invasive staphylococcal and enterococcal infections. From a mechanistic point of view, compound 16 inhibited undecaprenyl diphosphate phosphatase (UppP) with an IC50 value of 29 μM.Defective nitrogen-doped carbon materials have shown a promising application as metal-free electrocatalysts in the oxygen reduction reaction (ORR) and the hydrogen evolution reaction (HER). However, there are still some challenges in the tuning of metal-free electrocatalysts and in understanding the roles of various nitrogen species in their electrocatalytic performance. Herein, we design a covalent triazine framework (CTF)-based material as an effective metal-free bifunctional electrocatalyst. We chose BINOL-CN (2,2'-dihydroxy-[1,1'-binaphthalene]-6,6'-dicarbonitrile) as both a carbon and a nitrogen source for the fabrication of N-containing CTF-based materials. Four BINOL-CTFs with varying N-functionalities (pyridinic-N/triazine-N, pyrrolic-N, quaternary-N, and pyridine-N-oxide) were successfully obtained. These materials were evaluated in the ORR and the HER in basic and acidic conditions, respectively. The best material has an onset potential of 0.793 V and a half-wave potential of 0.737 V, and it follows first-order kinetics in a 4e- pathway in the ORR reaction. The same material shows an impressive HER activity with an overpotential of 0.31 V to achieve 10 mA/cm2 and a small Tafel slope of 41 mV/dec, which is comparable to 31 mV/dec for Pt/C, making it a potential bifunctional electrocatalyst. We showed that the ORR and HER reactivity of CTF-based materials depends exclusively on the amount of quaternary-N species and on the available surface area and pore volume. This work highlights the engineering of CTF materials with varying amounts of N species as high-performance bifunctional electrocatalysts.Dynamic windows, which electronically switch between clear and dark states on demand, save energy in buildings and automobiles by minimizing the lighting, heating, and cooling costs. In this study, we design dynamic windows by combining reversible metal electrodeposition (RME) and electrochromism, two promising approaches for optoelectronics. These hybrid dynamic windows tint on both electrodes. Reversible Bi and Cu electrodeposition is elicited on the working electrode, while an electrochromic cobalt hexacyanoferrate thin film darkens on the counter electrode. By facilitating plane parallel ion diffusion and dual tinting, this architecture enables dynamic windows to switch more rapidly than devices based on traditional RME schemes. We demonstrate that 25 cm2 devices switch with 58% optical contrast between a transparent and a color-neutral dark state in 20 s. Moreover, these hybrid dynamic windows switch 1000 times without significant degradation in optical performance.